1

Тема: Помогите с icecast!!!!!!

когда все люди переходят по моему IP

им пишут

К сожалению, Google Chrome не может открыть страницу 95.158.234.3:8000.
Попробуйте:
Снова откройте страницу: 95.158.234.3:8000
Искать в Google:К сожалению, Google Chrome не может открыть страницу 95.158.234.3:8000



=================================================================
ПОМОГИТЕ ЧТО МНЕ ДЕЛАТЬ!!!!!!

2

Re: Помогите с icecast!!!!!!

Ребят, ну сколько можно подымать одну и туже проблему сто раз. Проверяй открыт ли у тебя порт, если ты за роутером, зайди в него и пробрось порты нужные тебе.

В здоровом теле - здоровый дух!

3

Re: Помогите с icecast!!!!!!

У меня аналогичная проблема. Сервер Amazon. icecast.xml:

<icecast>
    <limits>
        <clients>1000</clients>
        <sources>30</sources>
        <threadpool>10</threadpool>
        <queue-size>524288</queue-size>
        <client-timeout>30</client-timeout>
        <header-timeout>15</header-timeout>
        <source-timeout>100</source-timeout>
        <!-- If enabled, this will provide a burst of data when a client
             first connects, thereby significantly reducing the startup
             time for listeners that do substantial buffering. However,
             it also significantly increases latency between the source
             client and listening client.  For low-latency setups, you
             might want to disable this. -->
        <burst-on-connect>5</burst-on-connect>
        <!-- same as burst-on-connect, but this allows for being more
             specific on how much to burst. Most people won't need to
             change from the default 64k. Applies to all mountpoints  -->
        <burst-size>65535</burst-size>
    </limits>

    <authentication>
        <!-- Sources log in with username 'source' -->
        <source-password>hackme</source-password>
        <!-- Relays log in username 'relay' -->
        <relay-password>hackme</relay-password>

        <!-- Admin logs in with the username given below -->
        <admin-user>admin</admin-user>
        <admin-password>password</admin-password>
    </authentication>

    <!-- Uncomment this if you want directory listings -->
    <!--
    <directory>
        <yp-url-timeout>15</yp-url-timeout>
        <yp-url>http://dir.xiph.org/cgi-bin/yp-cgi</yp-url>
    </directory>
     -->

    <!-- This is the hostname other people will use to connect to your server.
    It affects mainly the urls generated by Icecast for playlists and yp
    listings. -->
    <hostname>50.16.227.52</hostname>

    <!-- You can use these two if you only want a single listener -->
    <port>8000</port>
    <!--<bind-address>127.0.0.1</bind-address>-->

    <!-- You may have multiple <listener> elements -->
    <listen-socket>
    </listen-socket>
    <!--
    <listen-socket>
        <port>8001</port>
    </listen-socket>
    -->

    <!--<master-server>127.0.0.1</master-server>-->
    <!--<master-server-port>8001</master-server-port>-->
    <!--<master-update-interval>120</master-update-interval>-->
    <!--<master-password>hackme</master-password>-->

    <!-- setting this makes all relays on-demand unless overridden, this is
         useful for master relays which do not have <relay> definitions here.
         The default is 0 -->
    <!--<relays-on-demand>1</relays-on-demand>-->



    <relay>
        <server>ware.catv.ext.ru</server>
        <port>8140</port>
        <mount>/nashe128.mp3</mount>
        <local-mount>/nashe128</local-mount>
        <on-demand>0</on-demand>
        <relay-shoutcast-metadata>1</relay-shoutcast-metadata>
    </relay>

    <relay>
        <server>92.48.107.38</server>
        <port>8529</port>
        <mount>/</mount>
        <local-mount>/subfm</local-mount>
        <on-demand>0</on-demand>
        <relay-shoutcast-metadata>1</relay-shoutcast-metadata>
    </relay>


    <!-- Only define a <mount> section if you want to use advanced options,
         like alternative usernames or passwords
    <mount>
        <mount-name>/example-complex.ogg</mount-name>

   
        <username>othersource</username>
        <password>hackmemore</password>

        <max-listeners>1</max-listeners>
        <dump-file>/tmp/dump-example1.ogg</dump-file>
        <burst-size>65536</burst-size>
        <fallback-mount>/example2.ogg</fallback-mount>
        <fallback-override>1</fallback-override>
        <fallback-when-full>1</fallback-when-full>
        <intro>/example_intro.ogg</intro>
        <hidden>1</hidden>
        <no-yp>1</no-yp>
        <authentication type="htpasswd">
                <option name="filename" value="myauth"/>
                <option name="allow_duplicate_users" value="0"/>
        </authentication>
        <on-connect>/home/icecast/bin/stream-start</on-connect>
        <on-disconnect>/home/icecast/bin/stream-stop</on-disconnect>
    </mount>

    <mount>
        <mount-name>/auth_example.ogg</mount-name>
        <authentication type="url">
            <option name="mount_add"       value="http://myauthserver.net/notify_mount.php"/>
            <option name="mount_remove"    value="http://myauthserver.net/notify_mount.php"/>
            <option name="listener_add"    value="http://myauthserver.net/notify_listener.php"/>
            <option name="listener_remove" value="http://myauthserver.net/notify_listener.php"/>
        </authentication>
    </mount>

    -->

    <fileserve>1</fileserve>

    <!-- set the mountpoint for a shoutcast source to use, the default if not
         specified is /stream but you can change it here if an alternative is
         wanted or an extension is required
    <shoutcast-mount>/live.nsv</shoutcast-mount>
    -->

    <paths>
      <!-- basedir is only used if chroot is enabled -->
        <basedir>/usr/share/icecast2</basedir>

        <!-- Note that if <chroot> is turned on below, these paths must both
             be relative to the new root, not the original root -->
        <logdir>/var/log/icecast2</logdir>
        <webroot>/usr/share/icecast2/web</webroot>
        <adminroot>/usr/share/icecast2/admin</adminroot>
        <!-- <pidfile>/usr/share/icecast2/icecast.pid</pidfile> -->

        <!-- Aliases: treat requests for 'source' path as being for 'dest' path
             May be made specific to a port or bound address using the "port"
             and "bind-address" attributes.
          -->
        <!--
        <alias source="/foo" dest="/bar"/>
          -->
        <!-- Aliases: can also be used for simple redirections as well,
             this example will redirect all requests for http://server:port/ to
             the status page
          -->
        <alias source="/" dest="/status.xsl"/>
    </paths>

    <logging>
        <accesslog>access.log</accesslog>
        <errorlog>error.log</errorlog>
        <!-- <playlistlog>playlist.log</playlistlog> -->
         <loglevel>4</loglevel> <!-- 4 Debug, 3 Info, 2 Warn, 1 Error -->
         <logsize>10000</logsize> <!-- Max size of a logfile -->
        <!-- If logarchive is enabled (1), then when logsize is reached
             the logfile will be moved to [error|access|playlist].log.DATESTAMP,
             otherwise it will be moved to [error|access|playlist].log.old.
             Default is non-archive mode (i.e. overwrite)
        -->
        <!-- <logarchive>1</logarchive> -->
    </logging>

    <security>
        <chroot>0</chroot>
        <!--
        <changeowner>
            <user>nobody</user>
            <group>nogroup</group>
        </changeowner>
        -->
    </security>
</icecast>


Когда стартует ошибок не выдает, но http://50.16.227.52:8000 не открывается

4

Re: Помогите с icecast!!!!!!

Ты сидишь за роутером? Если да, то открываешь внешний ИП? Если да, ты ничего не откроешь! для других такой адрес, для тебя localhost:8000

В здоровом теле - здоровый дух!

5

Re: Помогите с icecast!!!!!!

Ashipka
Ваша ссылка у меня открывается

6

Re: Помогите с icecast!!!!!!

пишет Ashipka:

http://50.16.227.52:8000

Этот адрес у меня открывается тоже.

В здоровом теле - здоровый дух!

7

Re: Помогите с icecast!!!!!!

"за роутром сам себя не увидишь"
если только поставить локальную заглушку

8

Re: Помогите с icecast!!!!!!

Ребятки, нужна ваша помощь)) мы FM станция, стали делать потоки в интернет чтобы радио можно было на сайте слушать, но проблема сейчас стоит в выводом данных в плеер, смотрите, у нас свой сервак для вещание Isecaste2 версия вторая, для передачи потоков мы сейчас используем  ODDсact,  но данные не всегда поступают в плеер, те в программе в графе метаданные отображаются нормально, а вот в плеере может то две подряд песни обновлять, а потом песни три вообще не обновлять т е пустая строка в плеере идет либо остается название песни которая уже песни две назад играла!! на всякий случай скажу, что основная вещательная программа SYNADYN Broadcast  (для вещания FM), в момент вещания это программа создает файл broat.in в нем вся информация о треке который сейчас играет и 9 следующих... в ODDсact прописан этот файл то есть программа видет  метаданные, а вот отправлять почему то не всегда отправляет.... хочу попробовать SimpleCast но никак не разберусь как его настроить чтобы метаданные передавал, Ребят кто знает помогите плиз((((( если что пишите в аську 401 065 935.... или сюда, но тут не могу быть часто))