1

Тема: Помощь в настройке конфигов

Бьюсь уже несколько дней, ребят помогите smile Делал все по мануалу, а все равно не конектится с компа
http://rghost.ru/1375165

2

Re: Помощь в настройке конфигов

<icecast>
    <limits>
        <clients>100</clients>
        <sources>2</sources>
        <threadpool>5</threadpool>
        <queue-size>524288</queue-size>
        <client-timeout>30</client-timeout>
        <header-timeout>15</header-timeout>
        <source-timeout>10</source-timeout>
        <!-- If enabled, this will provide a burst of data when a client 
             first connects, thereby significantly reducing the startup 
             time for listeners that do substantial buffering. However,
             it also significantly increases latency between the source
             client and listening client.  For low-latency setups, you
             might want to disable this. -->
        <burst-on-connect>1</burst-on-connect>
        <!-- same as burst-on-connect, but this allows for being more
             specific on how much to burst. Most people won't need to
             change from the default 64k. Applies to all mountpoints  -->
        <burst-size>65535</burst-size>
    </limits>

    <authentication>
        <!-- Sources log in with username 'zloy' -->
        <source-password>zloy</source-password>
        <!-- Relays log in username 'good' -->
        <relay-password>good</relay-password>

        <!-- Admin logs in with the username given below -->
        <admin-user>nurofen</admin-user>
        <admin-password>qwwq</admin-password>
    </authentication>

    <!-- set the mountpoint for a shoutcast source to use, the default if not
         specified is /stream but you can change it here if an alternative is
         wanted or an extension is required
    <shoutcast-mount>/live.nsv</shoutcast-mount>
    -->

    <!-- Uncomment this if you want directory listings -->
    <!--
    <directory>
        <yp-url-timeout>15</yp-url-timeout>
        <yp-url>http://dir.xiph.org/cgi-bin/yp-cgi</yp-url>
    </directory>
     -->

    <!-- This is the hostname other people will use to connect to your server.
    It affects mainly the urls generated by Icecast for playlists and yp
    listings. -->
    <hostname>127.0.0.1</hostname>

    <!-- You may have multiple <listener> elements -->
    <listen-socket>
        <port>8000</port>
        <!-- <bind-address>127.0.0.1</bind-address> -->
        <!-- <shoutcast-mount>/radio</shoutcast-mount> -->
    </listen-socket>
    <!--
    <listen-socket>
        <port>8001</port>
    </listen-socket>
    -->

    <!--<master-server>127.0.0.1</master-server>-->
    <!--<master-server-port>8001</master-server-port>-->
    <!--<master-update-interval>120</master-update-interval>-->
    <!--<master-password>redd</master-password>-->

    <!-- setting this makes all relays on-demand unless overridden, this is
         useful for master relays which do not have <relay> definitions here.
         The default is 0 -->
    <!--<relays-on-demand>1</relays-on-demand>-->

    <!--
    <relay>
        <server>127.0.0.1</server>
        <port>8001</port>
        <mount>/example.ogg</mount>
        <local-mount>/different.ogg</local-mount>
        <on-demand>0</on-demand>

        <relay-shoutcast-metadata>0</relay-shoutcast-metadata>
    </relay>
    -->

    <!-- Only define a <mount> section if you want to use advanced options,
         like alternative usernames or passwords
    <mount>
        <mount-name>/example-complex.ogg</mount-name>

        <username>othersource</username>
        <password>hackmemore</password>

        <max-listeners>1</max-listeners>
        <dump-file>/tmp/dump-example1.ogg</dump-file>
        <burst-size>65536</burst-size>
        <fallback-mount>/example2.ogg</fallback-mount>
        <fallback-override>1</fallback-override>
        <fallback-when-full>1</fallback-when-full>
        <intro>/example_intro.ogg</intro>
        <hidden>1</hidden>
        <no-yp>1</no-yp>
        <authentication type="htpasswd">
                <option name="filename" value="myauth"/>
                <option name="allow_duplicate_users" value="0"/>
        </authentication>
        <on-connect>/home/icecast/bin/stream-start</on-connect>
        <on-disconnect>/home/icecast/bin/stream-stop</on-disconnect>
    </mount>

    <mount>
        <mount-name>/auth_example.ogg</mount-name>
        <authentication type="url">
            <option name="mount_add"       value="http://myauthserver.net/notify_mount.php"/>
            <option name="mount_remove"    value="http://myauthserver.net/notify_mount.php"/>
            <option name="listener_add"    value="http://myauthserver.net/notify_listener.php"/>
            <option name="listener_remove" value="http://myauthserver.net/notify_listener.php"/>
        </authentication>
    </mount>

    -->

    <fileserve>1</fileserve>

    <paths>
        <!-- basedir is only used if chroot is enabled -->
        <basedir>/usr/share/icecast2</basedir>

        <!-- Note that if <chroot> is turned on below, these paths must both
             be relative to the new root, not the original root -->
        <logdir>/var/log/icecast2</logdir>
        <webroot>/usr/share/icecast2/web</webroot>
        <adminroot>/usr/share/icecast2/admin</adminroot>
        <!-- <pidfile>/usr/share/icecast2/icecast.pid</pidfile> -->

        <!-- Aliases: treat requests for 'source' path as being for 'dest' path
             May be made specific to a port or bound address using the "port"
             and "bind-address" attributes.
          -->
        <!--
        <alias source="/foo" dest="/bar"/>
          -->
        <!-- Aliases: can also be used for simple redirections as well,
             this example will redirect all requests for http://server:port/ to
             the status page
          -->
        <alias source="/" dest="/status.xsl"/>
    </paths>

    <logging>
        <accesslog>access.log</accesslog>
        <errorlog>error.log</errorlog>
        <!-- <playlistlog>playlist.log</playlistlog> -->
          <loglevel>3</loglevel> <!-- 4 Debug, 3 Info, 2 Warn, 1 Error -->
          <logsize>10000</logsize> <!-- Max size of a logfile -->
        <!-- If logarchive is enabled (1), then when logsize is reached
             the logfile will be moved to [error|access|playlist].log.DATESTAMP,
             otherwise it will be moved to [error|access|playlist].log.old.
             Default is non-archive mode (i.e. overwrite)
        -->
        <!-- <logarchive>1</logarchive> -->
    </logging>

    <security>
        <chroot>0</chroot>
        <!--
        <changeowner>
            <user>nobody</user>
            <group>nogroup</group>
        </changeowner>
        -->
    </security>
</icecast>
<?xml version="1.0"?>
<ices:Configuration xmlns:ices="http://www.icecast.org/projects/ices">
  <Playlist>
    <!-- This is the filename used as a playlist when using the builtin 
     playlist handler. -->
    <File>/var/www/vhosts/gosha.me/radio/playlist.txt</File>
    <!-- Set this to 0 if you don't want to randomize your playlist, and to
     1 if you do. -->
    <Randomize>1</Randomize>
    <!-- One of builtin, perl, or python. -->
    <Type>builtin</Type>
    <!-- Module name to pass to the playlist handler if using  perl or python.
     If you use the builtin playlist handler then this is ignored -->
    <Module>ices</Module>
    <!-- Set this to the number of seconds to crossfade between tracks.
         Leave out or set to zero to disable crossfading (the default).
    <Crossfade>5</Crossfade>
    -->
  </Playlist>

  <Execution>
    <!-- Set this to 1 if you want ices to launch in the background as a
         daemon -->
    <Background>0</Background>
    <!-- Set this to 1 if you want to see more verbose output from ices -->
    <Verbose>0</Verbose>
    <!-- This directory specifies where ices should put the logfile, cue file
     and pid file (if daemonizing). Don't use /tmp if you have l33t h4x0rz
         on your server. -->
    <BaseDirectory>/tmp</BaseDirectory>
  </Execution>

  <Stream>
    <Server>
      <!-- Hostname or ip of the icecast server you want to connect to -->
      <Hostname>87.118.84.69</Hostname>
      <!-- Port of the same -->
      <Port>8000</Port>
      <!-- Encoder password on the icecast server -->
      <Password>zloy</Password>
      <!-- Header protocol to use when communicating with the server.
           Shoutcast servers need "icy", icecast 1.x needs "xaudiocast", and
       icecast 2.x needs "http". -->
      <Protocol>http</Protocol>
    </Server>

    <!-- The name of the mountpoint on the icecast server -->
    <Mountpoint>/radio</Mountpoint>
    <!-- The name of the dumpfile on the server for your stream. DO NOT set
     this unless you know what you're doing.
    <Dumpfile>ices.dump</Dumpfile>
    -->
    <!-- The name of you stream, not the name of the song! -->
    <Name>Shanson</Name>
    <!-- Genre of your stream, be it rock or pop or whatever -->
    <Genre>Default genre</Genre>
    <!-- Longer description of your stream -->
    <Description>Default description</Description>
    <!-- URL to a page describing your stream -->
    <URL>http://gosha.me:8000/radio</URL>
    <!-- 0 if you don't want the icecast server to publish your stream on
     the yp server, 1 if you do -->
    <Public>0</Public>

    <!-- Stream bitrate, used to specify bitrate if reencoding, otherwise
     just used for display on YP and on the server. Try to keep it
     accurate -->
    <Bitrate>32</Bitrate>
    <!-- If this is set to 1, and ices is compiled with liblame support,
     ices will reencode the stream on the fly to the stream bitrate. -->
    <Reencode>0</Reencode>
    <!-- Number of channels to reencode to, 1 for mono or 2 for stereo -->
    <!-- Sampe rate to reencode to in Hz. Leave out for LAME's best choice
    <Samplerate>22100</Samplerate>
    -->
    <Channels>2</Channels>
  </Stream>
</ices:Configuration>

чтоб народ не мучался, но здесь все гуд, причина в чем то другом. О ней может рассказать лог

Отредактировано tarasian666 (14-04-2010 11:47:19)